MSDS List Previous MSDS Next MSDS

MATERIAL SAFETY DATA SHEET

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Wall Feeder

PRODUCT CODE: F-WALL FEEDER, REFERENCE #: 60308
PRODUCT NAME: Wall Feeder
MANUFACTURER NAME AND ADDRESS:TELEPHONE NUMBERS:DATES:
Farnam Companies, Inc.24 hour emergency number(602)285-1660Date Created: 07/08/1996
301 West Osborn RoadBusiness hours(602)285-1660Revision: 04/26/2001
Phoenix, AZ. 85013Marketing(602)285-1660Printed: 01/12/2005

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
Wall Feeder

  HAZARDOUS COMPONENTS (CHEMICAL NAME)  CAS # OSHA PEL  ACGIH TLV   OTHER LIMITS   PERCENTAGE
1. Polyethylene/Polypropylene/Copolymer 9010-79-1          100.0 %

SECTION 3. HAZARDS IDENTIFICATION
Wall Feeder

EMERGENCY OVERVIEW

ROUTE(S) OF ENTRY: Inhalation? No , Skin? No , Eyes? No , Ingestion? No
POTENTIAL HEALTH EFFECTS (ACUTE AND CHRONIC)

CARCINOGENITICY: NTP? , IARC Monographs? , OSHA Regulated?
CARCINOGENICITY/OTHER INFORMATION

RECOMMENDED EXPOSURE LIMITS: LD 50/LC 50: > 5 mg/kg
SIGNS AND SYMPTOMS OF EXPOSURE
Exposure during normal use should not create symptoms.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE

SECTION 4. FIRST AID MEASURES
Wall Feeder

EMERGENCY AND FIRST AID PROCEDURES

NOTE TO PHYSICIAN

SECTION 5. FIRE FIGHTING MEASURES
Wall Feeder

FLASH PT: 430.00 F METHOD USED: COC, ASTM D92
EXPLOSIVE LIMITS: LEL: UEL:
AUTOIGNITION PT: N.A. EXTINGUISHING MEDIA
Foam, carbon dioxide, and dry chemical
FIRE FIGHTING INSTRUCTIONS
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH approved or equivalent and full protective gear. Use water fog or spray to cool exposed equipment and containers.
FLAMMABLE PROPERTIES AND HAZARDS
During a fire, irritating and highly toxic gases (carbon oxides and hydrocarbons) may be generated by thermal decomposition or combustion.
HAZARDOUS COMBUSTION PRODUCTS

SECTION 6. ACCIDENTAL RELEASE MEASURES
Wall Feeder

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
None needed.

SECTION 7. HANDLING AND STORAGE
Wall Feeder

HAZARD LABEL INFORMATION:
Avoid contamination of food & feed  Do not use/store near heat/open flame
PRECAUTIONS TO BE TAKEN IN HANDLING

PRECAUTIONS TO BE TAKEN IN STORING

OTHER PRECAUTIONS

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Wall Feeder

RESPIRATORY EQUIPMENT (SPECIFY TYPE)

EYE PROTECTION

PROTECTIVE GLOVES

OTHER PROTECTIVE CLOTHING

ENGINEERING CONTROLS (VENTILATION ETC.)

WORK/HYGIENIC/MAINTENANCE PRACTICES
Wash hands before eating, smoking, or using restroom.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Wall Feeder

PHYSICAL STATES:  [ ] Gas , [ ] Liquid , [ X ] Solid
BOILING POINT: N.A.
MELTING POINT:  N.A.
SPECIFIC GRAVITY (WATER = 1): .94gm/cm3
VAPOR PRESSURE (VS. AIR OR MM HG): 
VAPOR DENSITY (VS. AIR = 1): 
EVAPORATION RATE (VS BUTYL ACETATE=1):  
SOLUBILITY IN WATER: 
OTHER SOLUBILITY NOTES: Negligible
PERCENT VOLATILE: N.A.
PH: 
APPEARANCE AND ODOR
Red solid plastic with characteristic odor.

SECTION 10. STABILITY AND REACTIVITY
Wall Feeder

STABILITY: Unstable [ ] Stable [ X ]
CONDITIONS TO AVOID - INSTABILITY
None known
INCOMPATIBILITY - MATERIALS TO AVOID
Strong oxidizings agents.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
Carbon oxides and hydrocarbon gases
HAZARDOUS POLYMERIZATION: Will occur [ ] Will not occur [ X ]
CONDITIONS TO AVOID - HAZARDOUS POLYMERIZATION
Product will not undergo polymerization.

SECTION 11. TOXICOLOGICAL INFORMATION
Wall Feeder


SECTION 12. ECOLOGICAL INFORMATION
Wall Feeder


SECTION 13. DISPOSAL CONSIDERATIONS
Wall Feeder

WASTE DISPOSAL METHOD
Dispose of according to local, State, and Federal regulations.

SECTION 14. TRANSPORT INFORMATION
Wall Feeder

DOT PROPER SHIPPING NAME


DOT HAZARD LABEL: Not required
UN/NA NUMBER:
ADDITIONAL TRANSPORT INFORMATION

SECTION 15. REGULATORY INFORMATION
Wall Feeder


SECTION 16. OTHER INFORMATION
Wall Feeder


The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification.