Return to MSDS List , Previous MSDS , Next MSDS

M A T E R I A L   S A F E T Y   D A T A   S H E E T

SECTION 1. Product and Company Identification
TISSUMEND

Product Code: VPL-TISSUMEND
Product Name: TISSUMEND
Manufacturer Name and Address:Telephone Numbers:Dates:
Distributed by:CHEMTREC(800)424-9300Date Created: 02/22/2002
Veterinary Products LaboratoriesRevision: 07/26/2007
P.O. Box 34820Information:(888)241-9545Printed: 07/26/2007
Phoenix, AZ. 85067-4820
Additional Identity Information
3002385

SECTION 2. Composition/Information on Ingredients
TISSUMEND

  Hazardous Components (Chemical Name)  CAS #   Concentration
No data available.
   OSHA PEL ACGIH TLV
No data available.

SECTION 3. Hazards Identification
TISSUMEND

Emergency Overview
No data available.
Route(s) of Entry: Inhalation? Yes , Skin? Yes , Eyes? Yes , Ingestion? Yes
Potential Health Effects (Acute and Chronic)
Adhesice solidifies and immediately bonds eyelids, mouth, and skin.
May be irritating to mucous membranes.
Not a corcinogen, no chronic effects are known.
Carcinogenicity: NTP? No , IARC Monographs? No , OSHA Regulated? No
Carcinogenicity/Other Information
N

Recommended Exposure Limits
NE

Signs and Symptoms Of Exposure
NE

Medical Conditions Generally Aggravated By Exposure
None known

SECTION 4. First Aid Measures
TISSUMEND

Emergency and First Aid Procedures
Inhalation: Remove to fresh air. Call a physician if breathing is difficult.
Eyes: In case of contact with eyes, flush with large amounts of water. Get medical attention. Cured adhesive will not bond well to surface of eye, but corneal damage from abrasion may result. Do not wear contact lenses when working with this material.
Skin: In case of skin contact, and if polymerization has occurred, do not attempt to remove. Wash with large volumes of soap and water while flexing bonded skin parts. This procedure will slowly release bonded areas. DO NOT mechanically remove cured adhesive or attempt to pull skin apart.
Ingestion: Immediate bonding of mouth will occur. Get medical attention.
Note to Physician
No data available.

SECTION 5. Fire Fighting Measures
TISSUMEND

Flash Pt: N.A. Method Used: No data.
Explosive Limits: LEL: No data. UEL: No data.
Extinguishing Media
Carbon dioxide; dry chemical; foam

Fire Fighting Instructions
Wear self-contained breathing apparatus to protect against potentially toxic and irritating fumes

Flammable Properties and Hazards
Emits toxic fumes under combustion. Will polymerize upon contact with water.

Hazardous Combustion Products
No data available.

SECTION 6. Accidental Release Measures
TISSUMEND

Steps To Be Taken In Case Material Is Released Or Spilled
Small Spills - Wipe up with cloth. Immediately soak cloth with water to polymerize the adhesive. Caution! Cloth containing adhesive may undergo autoignition if not soaked with water.
Large Spills - Flood area with water. When cured, remove film with a scraper. Wear protective clothing.

SECTION 7. Handling and Storage
TISSUMEND

Hazard Label Information:
None known  
Precautions To Be Taken in Handling
Avoid storing at temperatures above 80 degrees F.

Precautions To Be Taken in Storing
Avoid humid air.
Other Precautions


SECTION 8. Exposure Controls/Personal Protection
TISSUMEND

Protective Equipment Summary - Hazard Label Information:
  Causes cyanosis (blue-gray skin and l  
  
Respiratory Equipment (Specify Type)
No data available.
Eye Protection
Chemical goggles

Protective Gloves
Rubber

Other Protective Clothing
No data available.
Engineering Controls (Ventilation etc.)
Local Exhaust: Recommended
Special:
Mechanical (Gen):
Other:

SECTION 9. Physical and Chemical Properties
TISSUMEND

Solubility Notes
will polymerize
Physical States:  [ ] Gas , [ X ] Liquid , [ ] Solid
Boiling Point: N.A.
Melting Point:  N.A.
Specific Gravity (Water = 1): N.A.
Density: No data.
Vapor Pressure (vs. Air or mm Hg): N.A.
Vapor Density (vs. Air = 1): N.A.
Evaporation Rate (vs Butyl Acetate=1):  N.A.
Solubility in Water: No data.
Percent Volatile: N.A.
Saturated Vapor Concentration: No data.
Viscosity: No data.
pH: No data.
Appearance and Odor
Violet slightly ciscous liquid

SECTION 10. Stability and Reactivity
TISSUMEND

Stability: Unstable [ ] Stable [ X ]
Conditions To Avoid - Instability
Heat and humidity

Incompatibility - Materials To Avoid
Water

Hazardous Decomposition Or Byproducts
Emits toxic fumes upon combustion

Hazardous Polymerization: Will occur [ ] Will not occur [ X ]
Conditions To Avoid - Hazardous Polymerization
Will polymerize on contact with skin and eyes and could bond with other surfaces. No hazardous release of energy will occur.

SECTION 11. Toxicological Information
TISSUMEND

No data available.

SECTION 12. Ecological Information
TISSUMEND

No data available.

SECTION 13. Disposal Considerations
TISSUMEND

Waste Disposal Method
Dispose of according to all local, State, and Federal regulations.

SECTION 14. Transport Information
TISSUMEND

DOT Proper Shipping Name
No data available.

DOT Hazard Label: None
UN/NA Number: No dat

Additional Transport Information
No data available.

SECTION 15. Regulatory Information
TISSUMEND

No data available.

SECTION 16. Other Information
TISSUMEND

Supercedes Revision 02/22/2002

NFPA Hazard Ratings:
Flammability
Health
0
b 2
Instability
Special Hazard
Minimal:0
Slight:1
Moderate:2
Serious:3
Extreme:4
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification.