|
Product Code:
|
270-307-C |
|
Product Name:
|
BIO SPOT FLEA & TICK MIST FOR CATS |
|
Manufacturer Information
|
|
|
Company Name:
|
Distributed by: |
|
|
Farnam Companies, Inc. |
|
|
301 West Osborn Road |
|
|
Phoenix, AZ |
|
Emergency Contact:
|
CHEMTREC (800)424-9300 |
|
Alternate Emergency Contact:
|
District of Columbia (202)483-0414 |
|
Information:
|
Farnam Companies, Inc. (800)234-2269 |
|
Chemical Family:
|
compound |
|
Additional Identity Information
|
|
16-oz 3004379 |
| Hazardous Components (Chemical Name) |
CAS # |
Concentration |
OSHA PEL |
ACGIH TLV |
| Pyrethrins and Pyrethroids |
8003-34-7 |
0.18 % |
No data. |
No data. |
| N-OCTYL BICYCLOHEPTENE DICARBOXIMIDE |
113-48-4 |
1.0 % |
No data. |
No data. |
| Isopropyl alcohol |
67-63-0 |
25.0 -98.0 % |
400 ppm |
400 ppm |
| Pyriproxyfen (NYLAR/BIOLAR) |
95737-68-1 |
0.125 % |
No data. |
No data. |
|
Emergency Overview
|
|
KEEP OUT OF REACH OF CHILDREN |
|
Route(s) of Entry:
|
Inhalation? Yes , Skin? Yes , Eyes? Yes , Ingestion? Yes |
|
Potential Health Effects (Acute and Chronic)
|
|
No data available. |
|
Signs and Symptoms Of Exposure
|
|
Product in eyes can cause temporary irritation,
tearing and blurred vision. Prolonged or repeated
skin exposure can cause irritation and reddening
of the skin. Excessive inhalation may cause nasal
and respiratory irritation. Ingestion may cause
stomach irritation resulting in nausea, cramps and
vomiting. Can also cause nervous disorders, such
as fatigue, headaches, dizziness, lack of
co-ordination, tremors, and unconsciousness. |
|
Medical Conditions Generally Aggravated By Exposure
|
|
None determined |
|
Emergency and First Aid Procedures
|
SKIN CONTACT: Remove contaminated clothing and
wash exposed area with soap and water. Obtain
medical assistance if irritation or other unusual
symptoms occur.
EYE CONTACT: Wash eyes with
water for at least 15 minutes and obtain medical
assistance.
INHALATION: In cases of
overexposure, move exposed person to fresh air.
Refer to a physician if subject experiences
difficulty breathing. If breathing has stopped
initiate basic life support and seek immediate
medical assistance.
INGESTION: In the event
of swallowing this material, do not induce
vomiting. Treat subject symptomatically and
supportively. Get immediate medical
assistance.
|
|
Note to Physician
|
|
This material contains pyrethrin insecticides. In cases of overexposure, consult a poison control center for detailed information concerning pyrethrin poisoning and treatment. |
|
Flash Pt:
|
61.00 F Method Used: TAG Closed Cup |
|
Explosive Limits:
|
LEL: No data. UEL: No data. |
|
Autoignition Pt:
|
460.00 F |
|
Fire Fighting Instructions
|
Self-contained breathing apparatus and full
protective equipment are recommended for
firefighters. Toxic or corrosive gases can be
expected in fires of this material.
Treat as
an oil fire. Use a full-faced self-contained
breathing apparatus along with full protective
gear. Keep nearby containers and equipment cool
with a water spray. Contain the run-off, if
possible for proper disposal. |
|
Flammable Properties and Hazards
|
|
Flammable liquid. Vapors are heavier than air and may travel to a flame or point of ignition. |
|
Hazardous Combustion Products
|
|
None known |
|
Extinguishing Media
|
|
Dry chemical, carbon dioxide or universal-type foams |
|
Unsuitable Extinguishing Media
|
|
None known |
|
Steps To Be Taken In Case Material Is Released Or Spilled
|
|
For large spills, isolate the spill area, restrict
access and post the area for hazards present
(flammable liquid, eye irritant) and necessary
precautions. Extinguish open flames and shut off
sources of ignition. Wear appropriate protective
equipment to avoid skin and eye contact. Mix with
sand or absorbent material and scoop or shovel
into a suitable, properly labeled container for
disposal. |
|
Hazard Label Information:
|
|
Do not use/store near heat/open flame Store away from children Store upright in cool, dry place Do not contaminate feed or foodstuff. |
|
Precautions To Be Taken in Handling
|
|
Do not transfer to other containers. |
|
Precautions To Be Taken in Storing
|
|
Store in a cool, dry place away from heat, open flames and other containers of food or feed. Store containers upright and closed. |
|
Other Precautions
|
|
Read and follow directions on product label. |
|
Protective Equipment Summary - Hazard Label Information:
|
|
Impervious gloves Goggles |
|
Respiratory Equipment (Specify Type)
|
|
An appropriate respirator should be used if respiratory discomfort occurs. For U.S. operations, OSHA 29 CFR 1910.134 must be followed if respirator use is employed in the workplace. For non U.S. operations, review pertinent local regulations. |
|
Eye Protection
|
|
Goggles are recommended if eye contact is possible. |
|
Protective Gloves
|
|
Avoid skin contact or wear impervious gloves when handling this material. |
|
Other Protective Clothing
|
|
Wear clothing with long sleeves to avoid skin contact. |
|
Engineering Controls (Ventilation etc.)
|
Good general ventilation should be sufficient to control airborne levels.
|
|
Work/Hygienic/Maintenance Practices
|
|
Wash thoroughly with soap and water after handling |
|
Additional Exposure Control Information
|
Isopropyl alcohol - US (OSHA): 400 PPM (983
mg/m3) OSHA TWA
500 PPM (1230 mg/m3) OSHA STEL
US (ACGIH): 400 PPM (983 mg/m3) ACGIH TWA
500 PPM (1230 mg/m3) ACGIH STEL
Pyrethrum -
US (ACGIH): 5 mg/m3 ACGIH TWA
US (OSHA): 5 mg/m3 OSHA TWA |
|
Physical States:
|
[ ] Gas [ X ] Liquid [ ] Solid |
|
Melting Point:
|
NA |
|
Boiling Point:
|
82.00 C |
|
Autoignition Pt:
|
460.00 F |
|
Flash Pt:
|
61.00 F Method Used: TAG Closed Cup |
|
Explosive Limits:
|
LEL: No data. UEL: No data. |
|
Specific Gravity (Water = 1):
|
0.788 |
|
Density:
|
NA |
|
Bulk density:
|
NA |
|
Vapor Pressure (vs. Air or mm Hg):
|
N.A. |
|
Vapor Density (vs. Air = 1):
|
N.A. |
|
Evaporation Rate (vs Butyl Acetate=1):
|
N.A. |
|
Solubility in Water:
|
N.A. |
|
Solubility Notes
|
Soluble in water
|
|
Percent Volatile:
|
N.A. |
|
Saturated Vapor Concentration:
|
N.A. |
|
Viscosity:
|
N.A. |
|
Heat Value:
|
NA |
|
Particle Size:
|
NA |
|
Corrosion Rate:
|
NA |
|
pH:
|
NA |
|
Appearance and Odor
|
|
A yellow liquid with an alcohol odor. |
|
Stability:
|
Unstable [ X ] Stable [ ] |
|
Conditions To Avoid - Instability
|
|
Avoid heat, open flame, and incompatibles. |
|
Incompatibility - Materials To Avoid
|
|
Incompatible with strong oxidizing agents such as household bleach, anhydrides, isocyanates and organometallics. |
|
Hazardous Decomposition Or Byproducts
|
|
No data available. |
|
Hazardous Polymerization:
|
Will occur [ ] Will not occur [ X ] |
|
Conditions To Avoid - Hazardous Polymerization
|
|
No data available. |
|
Additional Stability/Reactivity Information
|
|
Stable under normal conditions. |
ORAL TOXICITY: The oral rat LD50 is 5525 mg/kg
body weight in males, 4436 mg/kg body weight in
females, 4719 mg/kg combined.
INHALATION
TOXICITY: The 4 hour rat LD50 in the rat was >
5.9 mg/L.
DERMAL TOXICITY: The dermal rat
LD50 is greater than 2000 mg/kg body weight.
EYE IRRITATION: The product was determined to
produce severe, but reversible eye irritation. Of
six rabbits tested, 1 was free of all symptoms by
Day 10, all were free of symptoms by Day 14.
SKIN IRRITATION: The product was Essentially
Non-Irritating, Primary Irritation Index = 0.2.
SKIN SENSITIZATION: This product exhibited
potential to produce dermal sensitization in
guinea pigs. |
|
Carcinogenicity/Other Information
|
|
Not known |
| Hazardous Components (Chemical Name) |
CAS # |
NTP |
IARC |
ACGIH |
OSHA |
| Pyrethrins and Pyrethroids |
8003-34-7 |
n.a. |
n.a. |
A4 |
n.a. |
| N-OCTYL BICYCLOHEPTENE DICARBOXIMIDE |
113-48-4 |
n.a. |
n.a. |
n.a. |
n.a. |
| Isopropyl alcohol |
67-63-0 |
n.a. |
n.a. |
A4 |
n.a. |
| Pyriproxyfen (NYLAR/BIOLAR) |
95737-68-1 |
n.a. |
n.a. |
n.a. |
n.a. |
|
Carcinogenicity:
|
NTP? No IARC Monographs? No OSHA Regulated? No |
|
This product is toxic to fish. Keep out of lakes, streams, ponds, tidal marshes and estuaries. Do not apply where runoff is likely to occur. |
|
Waste Disposal Method
|
|
Triple rinse (or equivalent). Then offer for recycling, or puncture and discard in trash. The container is made of High Density Polyethylene (HDPE) #2 and can be offered for recycling. |
|
Company Policy or Disclaimer
|
|
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification. |