Return to MSDS List , First MSDS in list. , Last MSDS in list.

M A T E R I A L   S A F E T Y   D A T A   S H E E T

Generated  04/27/2007,   Revision  04/26/2007,   Supercedes Revision  06/06/1996,   Date Created  04/09/1992

SECTION 1. Product and Company Identification
100% PURE NEATSFOOT OIL

Product Code: BS-PURE NEAT
Product Name: 100% PURE NEATSFOOT OIL
Manufacturer Information
     Company Name: Distributed by:
  Farnam Companies, Inc.
  301 West Osborn Road
  Phoenix, AZ
     Emergency Contact: CHEMTREC                                (800)424-9300
     Alternate Emergency Contact: District of Columbia                    (202)483-0414
     Information: Farnam Companies, Inc.                  (800)234-2269
Chemical Family: Fatty oils

SECTION 2. Composition/Information on Ingredients
100% PURE NEATSFOOT OIL

Hazardous Components (Chemical Name) CAS # Concentration OSHA PEL ACGIH TLV Other Limits
NEATSFOOT OIL 8016-28-2 100.0 % No data. No data. No data.

SECTION 3. Hazards Identification
100% PURE NEATSFOOT OIL

Emergency Overview
No data available.
Route(s) of Entry: Inhalation? Yes , Skin? Yes , Eyes? Yes , Ingestion? Yes
Potential Health Effects (Acute and Chronic)
NE
Recommended Exposure Limits
NE
Signs and Symptoms Of Exposure
May cause gastrointestinal irritation, nausea, diarrhea.  May irritate eyes and skin.  May cause difficulty in breathing if mist of spray is inhaled.
Medical Conditions Generally Aggravated By Exposure
NE

SECTION 4. First Aid Measures
100% PURE NEATSFOOT OIL

Emergency and First Aid Procedures
IF INGESTED:  Do NOT induce vomiting because of aspiration hazard.  Drink two glasses of water and contact physician or Poison Control Center.  Do not give anything by mouth to an unconscious person.
IF INHALED:  Remove patient to fresh air.
IF IN EYES:  Flush eyes with large amounts of water for 15 minutes.  Get medical attention if irritation persists.
IF ON SKIN:  Remove contaminated clothing.  Wash skin with soap and water.  If irritation develops, get medical attention.  Wash clothes before reusing.

SECTION 5. Fire Fighting Measures
100% PURE NEATSFOOT OIL

Flash Pt: 410.00 C  Method Used:  COC
Explosive Limits: LEL:  NE          UEL:  NE
Fire Fighting Instructions
Treat as burning oil.  Use SCBA when fighting fire in a confined area.
Flammable Properties and Hazards
Product floats on water.  Spills may be slippery.
Extinguishing Media
CO2, dry chemical, or foam
Unsuitable Extinguishing Media
No data available.

SECTION 6. Accidental Release Measures
100% PURE NEATSFOOT OIL

Steps To Be Taken In Case Material Is Released Or Spilled
Confine spill.  If spill is large, pump as much liquid as possible into suitable containers for salvage or disposal. Absorb small or large spill on absorbent material (sawdust, clays, etc.). Shovel into containers for disposal.  Spills may be slippery.

SECTION 7. Handling and Storage
100% PURE NEATSFOOT OIL

Hazard Label Information:
Use process enclosures, local exhaust          Ventilation is normally required when
Precautions To Be Taken in Handling
Not for internal consumption. Keep from open flames.
Other Precautions
KEEP OUT OF REACH OF CHILDREN

SECTION 8. Exposure Controls/Personal Protection
100% PURE NEATSFOOT OIL

Respiratory Equipment (Specify Type)
none normally needed
Eye Protection
safety goggles (if desired)
Protective Gloves
Cotton
Other Protective Clothing
none normally needed
Engineering Controls (Ventilation etc.)
Local Exhaust:  sufficient
Special:
Mechanical (Gen):  if needed
Other:
Work/Hygienic/Maintenance Practices
Wash hands before eating, smoking or using restroom.

SECTION 9. Physical and Chemical Properties
100% PURE NEATSFOOT OIL

Physical States: [   ] Gas       [ X ] Liquid       [   ] Solid
Melting Point: 40.00 F - 55.00 F
Boiling Point: 375.00 F - 525.00 F
Autoignition Pt: No data.
Flash Pt: 410.00 C  Method:  COC
Explosive Limits: LEL:  NE          UEL:  NE
Specific Gravity (Water = 1): 0.91 at 40.0 C
Vapor Pressure (vs. Air or mm Hg): N.A.
Vapor Density (vs. Air = 1): N.A.
Evaporation Rate (vs Butyl Acetate=1): N.A.
Solubility in Water: No data.
Percent Volatile: N.A.
Corrosion Rate: No data.
pH: No data.
Appearance and Odor
amber liquid with mild fatty odor

SECTION 10. Stability and Reactivity
100% PURE NEATSFOOT OIL

Stability: Unstable [    ]       Stable [ X ]
Conditions To Avoid - Instability
High heat
Incompatibility - Materials To Avoid
strong oxidizing and reducing agents
Hazardous Decomposition Or Byproducts
CO and CO2
Hazardous Polymerization: Will occur [    ]       Will not occur [ X ]
Conditions To Avoid - Hazardous Polymerization
will not occur

SECTION 11. Toxicological Information
100% PURE NEATSFOOT OIL

Toxicological Information
No data available.
Carcinogenicity/Other Information
No data available.
Hazardous Components (Chemical Name) CAS # NTP IARC ACGIH OSHA
NEATSFOOT OIL 8016-28-2 n.a. n.a. n.a. n.a.
Carcinogenicity: NTP? No       IARC Monographs? No       OSHA Regulated? No

SECTION 12. Ecological Information
100% PURE NEATSFOOT OIL

Ecological Information
No data available.

SECTION 13. Disposal Considerations
100% PURE NEATSFOOT OIL

Waste Disposal Method
Dispose of in accordance with local, State and Federal regulations.

SECTION 14. Transport Information
100% PURE NEATSFOOT OIL

LAND TRANSPORT (US DOT)
     DOT Proper Shipping Name No data available.
     DOT Hazard Label: None

SECTION 15. Regulatory Information
100% PURE NEATSFOOT OIL

No data available.

SECTION 16. Other Information
100% PURE NEATSFOOT OIL

Additional Information About This Product
This product contains NO toxic chemicals currently subject to the reporting requirements of SARA Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372.
Company Policy or Disclaimer
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable.  It is offered for your consideration, investigation and verification.